American Panel AP20BC175-2 User Manual

REV. C Cooler is Better!TM USER’S MANUAL BLAST CHILLER / SHOCK FREEZER MODEL AP20BC175-2 American Panel Corporation 58

AP20BC175-2 Manual 9 SPACES AROUND THE CABINET • At least 15" clear space is required above the unit for service. • At least 6" clear spa

AP20BC175-2 Manual 10 USING THE HURRICHILL™ TECHNOLOGY BLAST CHILLING All cooked food rapidly loses its quality and aroma if it is not served promp

AP20BC175-2 Manual 11 PANNING AND LOADING PANNING 1. Standard pan depth is 2-1/2”. Other depths can be used but are not recommended as their use wo

AP20BC175-2 Manual 12 CONTROL PANEL FOR MODEL AP20BC175-2 BLAST CHILLER

AP20BC175-2 Manual 13 KEYBOARD KEYS ON/OFF & START/STOP CYCLE KEYS ON/OFF SOFT CYCLE START/STOP HARD CYCLE SHOCK CYCLE PROGRAM

AP20BC175-2 Manual 14 PROGRAMMING 1. INITIAL PROGRAMMING NOTE: Initial programming is preset at the factory. Use this section only if changes are

AP20BC175-2 Manual 15 g. To set the day, press or then press . 03(day)Blinksh. To set the hour, press or (be sure to continue to press the bu

AP20BC175-2 Manual 16 p. To change to YES or NO, press or then press . NO Blinksq. To change to YES or NO, press or then press . NO Blinksr.

AP20BC175-2 Manual 17 y. To change to YES or NO, press or then press . NO Blinksz. To change to YES or NO, press or then press . NO Blinks

AP20BC175-2 Manual 18 d. To change the temperature, press or then press . 28 Blinkse. To change the temperature, press or then press . 35 Bl

AP20BC175-2 Manual 1 INDEX INTRODUCTION 3 CONTROLLER FEATURES 3 OPERATING MODES 3 AUTOMATIC MODE 3 MANUAL MODE 3 OPERATING CYCLES 4 ADDITIONAL CYCLES

AP20BC175-2 Manual 19 l. To change the temperature, press or then press . 60 Blinksm. To change the temperature, press or then press . 28 B

AP20BC175-2 Manual 20 t. To change the time, press or then press . 05 Blinks The display will show: NOTE: The defrost is done by running the

AP20BC175-2 Manual 21 MANUAL HARD CYCLE PARAMETERS PROGRAMMING After about 2 seconds the display will automatically change to: The LED for "M&qu

AP20BC175-2 Manual 22 The display will show: NOTE: PROGRAMMING FOR "DEFROST" WILL BE THE SAME IN MANUAL MODE AS IT IS IN AUTOMATIC MODE

AP20BC175-2 Manual 23 OPERATION 1. AUTOMATIC MODE - SOFT CHILL a. With the display reading "OFF", press the (“ON/OFF”) button. b. To sel

AP20BC175-2 Manual 24 The display will show briefly: Then the display will show: STARTING CYCLE . . . alternating with 00:00 Will count upT

AP20BC175-2 Manual 25 The display will show briefly: Then the display will show: STARTING CYCLE . . . alternating with 01:29 Will count down

AP20BC175-2 Manual 26 b. Open the door. c. Press the ("START/STOP") button to start the defrost cycle. READY TO START Blinks The displ

AP20BC175-2 Manual 27 5. PREPARING AND USING THE PRINTER a. With the display reading "OFF", press the (“PRINT”) button. b. To start p

AP20BC175-2 Manual 28 y installed on the groove patterns to pop the front edge up. Lift off will facilitate the entry of the paper into d hold e. w

AP20BC175-2 Manual 2 MANUAL SOFT CYCLE PARAMETERS PROGRAMMING 20 MANUAL HARD CYCLE PARAMETERS PROGRAMMING 21 3. RECIPE NAME PROGRAMMING 22 OPERATION

AP20BC175-2 Manual 29 til the printer cover tilts up, then lift the cover completely off. e IBBON (WITH PAPER IN THE PRINTER) ter. paper and into MA

AP20BC175-2 Manual 30 Clast chiller, it is necessary that the condenser be kept lean so that air can circulate around it freely and come into contact

AP20BC175-2 Manual 31

AP20BC175-2 Manual 32

AP20BC175-2 Manual 33

AP20BC175-2 Manual 34 COMPUTER CONNECTION

AP20BC175-2 Manual 35 PARTS LIST PART # DESCRIPTION 990059 PRINTER 990074 TRANSFORMER 208V/24V/12V 990075 TRANSFORMER FOR PRINTER 990103 ELECT

AP20BC175-2 Manual 36 STANDARD WARRANTY AMERICAN PANEL CORP. 5800 S.E. 78th Street, Ocala, Florida 34472-3412 American Panel Corporation prod

AP20BC175-2 Manual 37 ORDERING PRINTER SUPPLIES (RIBBON & PAPER) Replacement paper and ribbons for the optional printer for your blast chiller c

AP20BC175-2 Manual 3 INTRODUCTION Blast Chiller Model AP20BC175-2 is used to rapidly chill cooked foods to temperatures suitable for refrigerated sto

AP20BC175-2 Manual 4 OPERATING CYCLES The operator can choose from the following 3 operating cycles: MODE END FOOD TEMP. USES NOTES SOFT CHILL 38o

AP20BC175-2 Manual 5 INSTALLATION OF REMOTE UNITS REQUIREMENTS TO BE MET DURING INSTALLATION (8 STEPS) COMPRESSOR FIG. 11. Inclinatio

AP20BC175-2 Manual 6 INSTALLATION AT DIFFERENT LEVELS If the remote condensing unit is installed at a higher level than the cabinet (FIG. 6) insert a

AP20BC175-2 Manual 7 INSTALLATION WARNINGS READ ALL OF THE INSTRUCTIONS IN THIS MANUAL BEFORE YOU ATTEMPT TO INSTALL THE EQUIPMENT AND CAREFULLY FOL

AP20BC175-2 Manual 8 4. At least 15” clear space is required above the unit for service. 5. At least 6” is required on both sides of the cabinet (for